Man-Rated Hoist, 22 lb

The pelsue phqr series hoist is designed to be a personnel rescue and retrieval device. The phqr series hoist sharesmany of the same qualities and capabilities as a standard PH series hoist but is unique in the fact that the lifting rope is not permanently fixed to the hoist drum. The hoist drum incorporates a rope gripping cleat into which the rescue line can be placed when a retrieval or rescue becomes necessary. This unique feature allows for extremely fast retrieval as there is no need to take up slack in the rescue line as the rope can be gripped at any location along its length. The separation of the rope from the hoist also addressees a safety concern when working in underground manhole vaults that can only be entered roadside where the potential for an out of control vehicle dragging away the retrieval system is possible. The hoist is available in two model variations: the rope can either be loaded on the underside (model #PHQR) or topside (model #PHQRR) of the rope drum. The two variations of hoist have rotations the reverse of each other which in turn places the hoist handle on either the left (model #PHQR) or right (model #PHQRR) hand side of the hoist frame. The model #PHQR and #PHQRR do not include rope and hook assemblies, but a wide variety of sub-models are available with varying lengths of rope and differing snap hooks and end fittings. The phqr series can coil a maximum of 70’ of 1/4 in synthetic rope. The use of wire rope is not possible on the phqr series hoist. The phqr hoist is equipped with a standard pelsue quick-release bracket (#501073-001). Other adapter brackets can be supplied or added upon request.

• Rated to raise and lower personnel loads of up to 31 pounds
• Features a 5.5: 1 gear ratio single speed drive and a retrieval rate of 23 feet per minute
• Continuous braking drive to prevent freewheeling
• Ensures safe rescue with a secondary "overspeed" brake and a double pawls on the friction brake. Brake pads are low-wear and capable of withstanding high temperatures
• Trouble-free continuous use from anti-friction drive bearings
• Tensioner pad prevents loosening of cable laysslip clutch drive prevents back-winding of cable drum
• Reduced susceptibility to corrosion in harsh environments as a result of zinc-plated and anodized aluminum components
• Removable drive handle with speeder knob and gear teeth cover make for easy, quick, and safe setup
• Brackets and pins included for quick mountingsoft carrying case included